Product category

Your location:Home - Product - Regulating valves


ZZWPE Self operated electronic temperature control valve

Nominal diameterDN20~DN200

Nominal pressure1.0 1.6 4.0 6.4

Temperature℃-20~200 -40~250 -40~450 -60~450

Structure lengthGB12221-89

Flange standardCast iron flange as perGB4216-84、GB9113-88

Product overview

The biggest feature of the valve is that it only needs ordinary 220V power supply, and uses the energy of the regulated medium to directly automatically adjust and control the temperature of steam, hot gas, hot oil and gas. It can also be used to prevent overheating or heat exchange. The valve has the advantages of simple structure, convenient operation, wide temperature regulation range, fast response time, reliable sealing performance, and can be adjusted at will during operation, Therefore, it is widely used in hot water supply in chemical industry, petroleum, food, textile, hotels and restaurants.

Product features

The nominal diameter of this series of products is from 20 to 200mm, the nominal pressure is 1.0, 1.6, 4.0 and 6.4Mpa, the service temperature range is - 20 ℃ ~ 350 ℃, and the received signal is 0 ~ 10ma.dc or 4 ~ 20ma.dc to change the regulated medium flow and keep the controlled process parameters at the given value. The single seat regulating type is suitable for occasions with small differential pressure, large medium viscosity or slight particle impurities. The sleeve adjustment type is suitable for occasions with large pressure difference.

Product parameters

Valve body and bonnet: HT200, zg230-450, zg1cr18ni9ti

Valve core: zg1cr18ni9ti, stellite alloy surfacing reinforced polytetrafluoroethylene

Packing: PTFE, flexible graphite

Push rod and bushing: 2Cr13

Gasket: Rubber asbestos plate, 10, 1Cr18Ni9Ti asbestos spiral wound gasket

Bellows: 1Cr18Ni9Ti

Flange sealing surface type: PN10 and PN16 are convex

PN40 and pn64 are concave and convex, and the valve body is concave

Jacket insulation jacket heat carrier interface: butt welding φ eighteen × four

The distance between valve body flange and flange end face can be manufactured according to the specified standard. Such as ANSI, JIS, DIN and other standards

Bzzw self operated temperature regulating valve is an actuator product that uses the energy of the regulated medium to realize automatic temperature regulation without external energy. Nominal pressure PN16, 40, 64; The temperature adjustment range is 0 ~ 270 ℃; The connecting joint of temperature controller is G1 external thread; Flange standard: PN16, 40 according to bg9113-8; Pn64 according to jb79.2-94; PN16 is convex flange; PN40 and 64 are concave and convex flanges, and the valve body is concave. The structural length shall be in accordance with gb12221-89.

The self operated temperature regulating valve has a wide variety of structures, including zzwp, zzwm single seat and sleeve regulating valves.

There are two options for heating regulation (type b) and cooling regulation (type K).

It has a wide temperature setting range and easy adjustment.

There are overtemperature and overload protection measures, safe and reliable.

The temperature setting is convenient and can be set continuously during operation.