Products

Product category

Your location:Home - Product - Hydraulic valves

400X

400X Flow control valve

Nominal pressurePN16-PN25

Test shell strength2.4MPa~3.75MPa

Liquid high pressure seal1.76MPa~2.75MPa

Gas low pressure seal0.6MPa~0.6MPa

Temperature-29~260℃

MediumWater, steam, oil, etc

Product introduction

400X Flow control valve is a multi-functional valve that uses high-precision pilot mode to control flow. It is applicable to the pipeline where the flow and pressure of the distribution pipe need to be controlled. Keep the predetermined flow unchanged, limit the excessive flow to a predetermined value, and appropriately reduce the upstream high pressure. Even if the pressure upstream of the main valve changes, it will not affect the flow downstream of the main valve. The valve changes the principle that the conventional throttle valve uses orifice plate or pure machinery to reduce the drainage area, and uses relevant pilot valves to minimize the loss of energy in the throttling process. In case of emergency, 400X Flow control valve can completely cut off the flow to avoid loss. High control sensitivity, safety and reliability, simple debugging and long service life.